So I'm hooking up my winch and I'g going to mount the solenoid under the dash and I need to run a hot line to it that is only hot when the key is on. Obviously the solenoid runs to the battery as well for the power to run the winch.
So my question is what is the best way to access the acc outlet in the fuse box? Seem's it's probably best to remove the fuse box and then plug in from under it. But I't thought I'd ask if others with an S or 2105 or newer RZR 1000 had done this.
Of course I could cut into the wire that goes to the power outlet on the dash too. That would probably be easiest, but I'd like to at least have an option to run it from the fuse box.
So my question is what is the best way to access the acc outlet in the fuse box? Seem's it's probably best to remove the fuse box and then plug in from under it. But I't thought I'd ask if others with an S or 2105 or newer RZR 1000 had done this.
Of course I could cut into the wire that goes to the power outlet on the dash too. That would probably be easiest, but I'd like to at least have an option to run it from the fuse box.